Water, sewer, drains and water heaters across Rye, New Hampshire. Price quoted before the work starts.
The full range of residential plumbing, water and sewer work.
Clogged kitchen, bath, laundry and floor drains in Rye cleared by cable or hydro jet, then a camera to show why it clogged.
Sump pump repair, replacement and battery backup in Rye so the basement stays dry when the power goes with the storm.
Softeners, filtration and treatment for Rye homes, sized off an actual water test rather than a sales script.
Gas, electric and tankless water heaters repaired or replaced in Rye, including elements, thermostats, valves and anode rods.
No pressure, short cycling or a pump that will not shut off near Rye — usually the switch or a waterlogged tank.
Acoustic listening, thermal imaging and pressure testing pinpoint the leak in Rye so the repair stays small.
When water is actively coming into the house in Rye, you get a live person on the phone and a truck moving the same day.
Brown water, low pressure and pinhole leaks across a Rye house mean the pipe, not the fixtures. Repiping fixes it once.
Full water service replacement in Rye with the trench backfilled and the sod set back down properly.
Running, leaking, rocking and clogged toilets in Rye fixed, or replaced with a fresh flange, wax seal and supply line.
Gas leaks located and repaired in Rye, plus new lines run to ranges, dryers, water heaters and grills.
Root intrusion, bellied lines and collapsed clay pipe under Rye yards repaired with the lawn put back right.
New disposal installed in Rye with the mounting and the dishwasher connection done properly.
Dripping faucets, worn shower valves and sink or tub fixtures repaired or replaced across Rye.
Frozen pipe repair plus insulation on that run so the same section does not split again next winter.
Every Rye job starts with finding out what is really happening — a gauge on the system, a camera down the line, a meter check with everything off. Guessing is how homeowners end up paying for a repipe when they had one bad section.
With about 10,598 residents, Rye, New Hampshire generates a steady run of leak detection, drain cleaning and water heater work. The ones that get expensive are almost always the ones that got ignored for a season.
Why homeowners keep the number after the first job.
This started as two people and a truck in 1998 and grew on water, sewer and drain work. Nearly three decades in one trade, not a franchise name bought off a shelf last year.
Told you need a full repipe or a new sewer line? Get it looked at again. Sometimes it is a smaller fix, and sometimes we confirm the first plumber was right so you can spend with confidence.
You hear the number before a wrench moves. No hourly meter running while you stand there, and no discovering the real cost after the wall is open.
Drop cloths go down, cuts get made clean so the patch is easy, and the old tank or fixture leaves with the truck. The room should look better than we found it.
Every job goes to a licensed, insured plumbing contractor who pulls the permits your town requires. Licence numbers are on the invoice, not buried on a webpage.
The questions homeowners ask us most.
Yes. Burst pipes, sewage backups and no-water calls in Rye are answered around the clock. The first thing on the phone is getting your main shutoff closed so the house stops taking damage while a truck is on the way.
You get a price for the repair before any work starts, not an hourly meter that runs while you watch. The diagnostic visit in Rye is quoted up front on the phone, and if you approve the repair that visit charge goes toward the job.
That is the classic hidden leak — usually a slab leak, an underground service line, or a toilet flapper passing water quietly all night. A Rye leak detection visit puts a pressure gauge on the system and finds it without digging up the yard first.
Under about eight years old with a bad element, thermostat or valve, repair is usually the better money in Rye. Past twelve years, or if the tank itself is weeping, replacement is the honest answer and we will say so.
For a true emergency in Rye the target is same-day, and most of the time inside a few hours. Scheduled work like a water heater swap or a fixture set is usually booked within two or three business days.
Almost always. A cable machine or hydro jet goes in through an existing cleanout and clears the line from there. In Rye the camera goes down afterward so you can see whether it was grease, roots or a broken section.
What homeowners say after the truck pulls out.
"Got a quote elsewhere for a full repipe at five figures. Second opinion here found two bad sections and a pressure regulator. Cost me a fraction of the first number."
"Bill jumped forty dollars with nobody home. They found a slab leak under the hallway in about twenty minutes with a listening device. No jackhammering until they knew exactly where."
"Good work on the sewer line, camera first so I could see the root ball myself. Took a day longer than quoted because of the rain, but they called me both mornings instead of leaving me guessing."
Plumbing service in the communities nearby.